Image

SEA150

TSO'D 3ø 400 Hz STATIC INVERTER
1.5 KVA Lightweight

DESCRIPTION:

The SEA150 is a lightweight, 400Hz 3 phase static inverter. This model utilizes the latest state of the art, solid state circuitry to invert a 28 Vdc input to a 115/200 Vac, 400 Hz, 3 phase sine wave output.

Design features include a crystal-controlled oscillator for output frequency stability and a pulse-width-modulated square to sine wave power conversion scheme for efficient & reliable operation.

The SEA150 static inverter is primarily designed to power airborne and ground instruments, compasses, gyros, radar and navigation equipment.

Specifications

Current
1.5 Adc nominal at NL; 63 Adc at 1.5 KVA at 28 Vdc.
Output Voltage
115 Vac Line to Neutral, 200 Vac Line to Line
Power
1500 VA (500 VA per Phase)
Frequency
400 Hz ± 0.4 Hz
Phase & Wave Form
Three phase, Sinewave
Harmonic Distortion
2.5 % (nominal)
Power Factor
+0.8 TO -0.8
Efficiency
87% (nominal)
Response Time
300 uSec (No Load to Full Load)
Regulation
1 % Line, 1 % Load, 2.5 % Temperature
Overload Capacity
110 % of rated power for 2 hrs, 150 % of rated power for 5 minutes
Protection Circuit
The inverter will shutdown under the following conditions:
  • Input voltage > 37.5 ± 1 Vdc.
  • Input voltage < 18 Vdc ± 1.5 Vdc.
  • Internal high ambient temperature.
  • Short circuit condition (after 2 to 15 Sec)(manual reset)
Remote On-Off
Yes
Operating Temperature
-55 ° C to +71 ° C (-65 ° F to +160 ° F)
Weight
15.7 ± 0.3 lbs (7.13 ± 0.23 kgs)
Altitude
55,000 ft
Environmental
DO-160C Env. Cat. F2ZBB[ LV] E1XXXXXBXAXXXZXXX
Cooling
Thermostatically controlled brushless fan (Fan ON above 50 ° C)
Compliance
FAA TSO-C73
Image
About Us
Lorem, ipsum dolor sit amet consectetur adipisicing elit. Tempore ipsam alias quae cupiditate quas, neque eum magni impedit asperiores ad id sint repudiandae quaerat, omnis commodi consequatur dolore rerum deleniti!
Contact Us
121 King St, Melbourne VIC 3000, Australia.