Image

SC100

TSO’D 400 Hz LIGHTWEIGHT SINEWAVE
1 KVA STATIC INVERTER

Description:

The SC100 is a lightweight 400Hz static inverter. This model utilizes the latest state of the art, solid state circuitry to invert a 28 Vdc input to a 115 Vac, 400 Hz sine wave output.

Design features include a crystal-controlled oscillator for output frequency stability and a pulse-width-modulated square to sine wave power conversion scheme for efficient & reliable operation.

The SC100 static inverter is primarily designed to power airborne and ground instruments, compasses, gyros, radar and navigation equipment

Specifications

Input Voltage
28 Vdc (nominal), 20 Vdc to 36.5 Vdc Range
Current
1.0 Adc nominal at NL; 41.5 Adc at 1 KVA at 28 Vdc.
Output Voltage
115 Vac ± 3 Vac nominal
Power/Current
1000 VA / 8.6 Aac
Frequency
400 Hz ± 0.4 Hz
Phase & Wave Form
Single phase, Sinewave
Harmonic Distortion
2.5 % (nominal)
Power Factor
+0.8 TO -0.8
Efficiency
87% (nominal)
Response Time
300 uSec (No Load to Full Load)
Regulation
1 % Line, 1 % Load, 2.5 % Temperature
Overload Capacity
110 % of rated power for 2 hrs, 150 % of rated power for 5 minutes
Protection Circuit
The inverter will shutdown under the following conditions:
  • Input voltage ³ 37.5 ± 1Vdc.
  • Input voltage £ 18 Vdc ± 1.5 Vdc.
  • Internal high ambient temperature.
  • Short circuit condition (after 2 to 15 Sec)(manual reset)
Remote On-Off:
Yes (Ground for ON)
Operating Temperature
-55 ° C to +71 ° C (-65 ° F to +160 ° F)
Weight
7.5 ± .3 lbs (3.4 ± .14 kgs)
Altitude
55,000 ft
Environmental
DO-160C Env. Cat. F2ZBBŠLV‹E1XXXXXBXAXXXZXXX
Cooling
Thermostatically controlled brushless fan (Fan on above 50 ° C)
Compliance
FAA TSO-C73
Image
About Us
Lorem, ipsum dolor sit amet consectetur adipisicing elit. Tempore ipsam alias quae cupiditate quas, neque eum magni impedit asperiores ad id sint repudiandae quaerat, omnis commodi consequatur dolore rerum deleniti!
Contact Us
121 King St, Melbourne VIC 3000, Australia.