60/50 Hz STATIC INVERTERS

Sps 316 3These 50Hz and 60Hz static inverters are used as a source of on-board AC power for the operation of audio and video equipment, portable computers, stereo equipment systems and telecommunication equipment in aircraft that have 28 or 14 Volt DC electrical systems.

For applications requiring greater power these inverters may be paralleled for higher output capacity.

 

SPECIFICATIONS:

Input Voltage: 28 VDC ± 2 volts. Withstands 88 vot transient for 1 millisecond.
Power Factor: .8 to 1.0
Amplitude Distortion: Less than 7%
Wave Form: Sine wave.
Phase: Single
Short Circuit: Will withstand for 1 minute.
Temperature: -65°F to +160°F (-55°C to +71°C)
Altitude: 55,000 feet.
Qualification: 60Hz Static Inverters Approved under FAA TSO-C73

 

MODEL OUTPUT VOLTAGE
(+5% -7%)
POWER
VA
FREQ. HZ
( ±1 )
INPUT VDC
CURRENT ADC
WEIGHT
LBS. (KG.)
SPS-206 115 VAC 200 60 28 VDC 10.5A 15.7 (7.1)
SPS-306 115 VAC 300 60 28 VDC 15.8A 18.0 (8.1)
SPS-205 115 VAC 200 50 28 VDC 10.5A 15.7 (7.1)
SPS-2052 230 VAC 200 50 28 VDC 10.5A 15.7 (7.1)
SPS-305 115 VAC 270 50 28 VDC 15.8A 18.0 (8.1)
SPS-3052 230 VAC 270 50 28 VDC 15.8A 18.0 (8.1)
SPS-306B 115 VAC 375 60 28 VDC 19.8A 18.0 (8.1)
SPS-306B-3* 115 VAC 375 60 28 VDC 19.8A 18.0 (8.1)
SPS-306-3* 115 VAC 300 60 28 VDC 15.8A 18.0 (8.1)
SPS-3062 DUAL 115 VAC 300 60 28 VDC 15.8A 18.0 (8.1)
SPS-316-3* 115 VAC 300 60 14 VDC 31.0A 18.0 (8.1)

*Units with remote on-off feature are identified with -3 after model number.