FREQUENCY AC POWER CONVERTER
115V/60Hz to 0-130V/400Hz 1350VA
The Model FDB135 is a single phase to 115 Vac, 400 HZ switch-mode converter. Input voltage is 120 Vac. Output voltage is adjustable 0 to 130 Vac with the voltage adjust pot on the front panel. 400 HZ output frequency is adjustable from 320 to 480 HZ. Maximum output power is 1350 VA into any power factor load.
The FDB135 incorporates overload and short circuit protection. Overload is protected by voltage fold back (constant current) and short circuit is protected by shutdown.
120 Vac ± 10% (108 to 132 Vac)
47 to 440 Hz
0 to 130 VAC and 0 to 30 VAC
10 Amp for 0 to 130 VAC and 5.77 Amp for 0 to 30 VAC
100% of rated output into any power factor
1% THD typical at full linear load
± 1% No load to Full load
± 0.1% for ± 10% line change
80 to 85 %
Latches off to protect load. Recycle input power to restore
Over temperature shutdown.
6 Amp fuse on rear panel
0°C To 55°C
FRONT PANEL METER & CONTROLS
- Power On/Off switch:
- Voltage and Frequency Potentiometers
- Two digital meters: True RMS Volts, True RMS Amps or Frequency.
- Frequency / Amps select switch and indicator
- Output On/Off switch & indicator
- Two LED's: Constant current and fault output
- Safety socket
3.5" H x 17" W x 17" D for 19" relay rack mounting
IEC 320 C-20 receptacle with 6 foot line cord with NEMA5-15 plug.
Rear mounted barrier strip & Front panel safety socket (banana receptacle)
Internal fans w/side intake and rear exhaust